Digital Watchdog DW-VF4 - Live Display Mode

15 | Chapter 1 : DVR User’s Manual
2.2 Live Display Mode
2.2.1 Channel Selection
After the camera channels are connected, the live real-time display mode is controlled through an easy remote control button
operation.
The images can be seen on real-time by 1, 4, and PIP screen. Press the Up & Down Arrow buttons on the IR remote controller to
change the display screen sequentially.
1 Channel] [4 Channel]
[9 Channel] [16 Channel]
[PIP Mode]
To select a channel by mouse, place the cursor on the desired channel and click the left mouse button. To return to previous screen
mode, click the left mouse button again.
Note
To select a channel using the mouse, the user is required to perform a slow and clear click of the left mouse button.