User’s Manual | 42
If system resources are busy with task, such as making a network connection or performing video playback during the format
process, the format may fail. If the format fails, reboot the system resources by unplugging the power supply cable in the back of
the DVR. When the DVR boots back up, try to format the hard drive again.
[Format Completed]
1) Formatting may take around 2 minutes for 250GB, 3 minutes for 500GB, or 4 minutes for 750GB.
2) The system always reserves a maximum of 5GB of space in each built-in HDD to utilize
The memory for archiving effectively.
3.1.5 Factory Default
With an authorized password, users can get the system back to factory default configuration.
Once the user clicks the [START] button and enters the admin password, all the configuration values made by the user
will be deleted. The system settings will be sent to factory defaults, but the recorded video data will not be erased.
To Next Page
Loading...
