49 | Chapter 1 : DVR User’s Manual
Mode “M” (Motion Detection) or “S” (Sensor/Alarm) uses the Event Recording Settings only.
[Event Record Setting]
Mode “C+M” (Continuous + Motion), “C+S” (Continuous + Sensor), or “C+M+S” (Continuous + Motion + Sensor) simultaneously
engages both Continuous and Event Recording Settings. DVR records with continuous record settings, but when
there is an event (Motion, Sensor, and Alarm), the DVR records with the Event Record Settings.
Select the record Resolution for each camera channel. The Resolution is applied to both Continuous and Event
Record Settings.
[Resolution Setup]
[Resolution] is the required number of horizontal and vertical pixels in a frame (horizontal pixels x vertical pixels). Select from the
options: 352×240/288, 704×240/288, and 704×480/576. Default is 352×240/288. Picture quality gets better, as the resolution
increases.
To Next Page
Loading...
