11
6.1.2 Date and Time
Go to ConfigÆSystemÆDate and Time. Please refer to the following interface.
You can select the time zone and DST as required.
Click “Date and Time” tab to set the time mode.
6.1.3 Local Config
Go to ConfigÆSystemÆLocal Config. You can set the storage path of the captured pictures
and video records. You can also enable or disable the video audio.
6.2 Image Configuration
Image Configuration includes Display, Video/Audio, OSD, Video Mask and ROI Config.
6.2.1 Display Configuration
Go to ImageÆDisplay interface as shown below. You may set and adjust the picture’s
brightness, contrast, hue and saturation, etc.
To Next Page
Loading...