Setup for your MiraScreen
Please connect your phone or laptop to
MiraScreen’sSSIDvia WiFi.Launch web browser on your
phone or laptop, then access the IP address
(http://192.168.203.1) of MiraScreen to enter setup page.
3. The setup page of MiraScreen will be shown on your
phone or laptop.
Settings and Firmware Upgrade
1. Internet: Connect MiraScreen to home WiFi router
Note: The connection between MiraScreen and your
device may be disconnected when MiraScreen connects.
2. WiFi Password: Change the password of MiraScreen
3. Display: ‘game mode’ with better frame rate. ‘video
mode’ with better resolution.
4. Resolution: Change the output resolution
5. EZMira mode: Switch between ‘Mirror only’ and
‘Mirror+Streaming’ for AirPlay reception.
6. Upgrade: Install latest firmware for MiraScreen.
IMPORTANT! Please upgrade to the latest version in
order to support all the latest devices.
7. Reset to default: Factory reset MiraScreen
To Next Page
Loading...
