4
PANEL DESCRIPTIONS (RECEIVER UNIT):
1. HDMI OUT: This output is to connect the HDMI input port of your display such
as an HDTV.
2. IR IN: Connect to the IR Receiver for IR signal reception. Ensure that remote
being used is within the direct line-of-sight of the IR receiver.
3. POWER LED: This LED will illuminate when the device is connected with power
supply.
4. CAT: Connect the CAT input of the receiver with the CAT output of the
transmitter with CAT6 cable (not included).
5. DIGITAL SIGNAL INDICATOR LIGHT:
Light on: HDMI signal with HDCP.
Light flashing: HDMI signal without HDCP.
Light off: No HDMI signal.
CONNECTION DIAGRAM:
IR OUT DC 12V
HDMI OUTEDID
HDMI IN
CAT
IR IN CAT
HDMI OUT
DVD or Blu-ray Player
UHDTV
UHDTV
IR Receiver
LAN
LAN
IR Blaster
Receiver
Transmitter
Power Supply
CAT 6 cable
To Next Page
Loading...