6
11. PEDAL
Press the pedal to turn the effect
on and off.
12. OUT 1 (MONO)
Connect this output to a single
guitar amplifier when only one amp
is being used. Use unbalanced 1/4"
instrument cables only.
13. INDICATOR LED
This LED indicates when the effect is
turned on. If the LED does not light
when the cables are connected, the
battery needs to be replaced.
14. OUT 2
Connect this output to a second
amplifier for true stereo chorusing.
Stereo is the best way to get the
most effective chorusing experience
from the Chorus Factory
TM
pedal.
Use unbalanced 1/4" instrument
cables only.
To Next Page
Loading...
