6
Connecting the Tuner
The HT-2 Tuner has a single 1/4" Input and two 1/4" Outputs – MUTE and
THRU. The HT-2 offers true hardwire bypass when not in use to preserve your
guitar’s signal without any loss or buffering into your amp and other effects.
If you use the HT-2 on a pedal board with other effects devices, it doesn’t
really matter where in your effects chain the HT-2 is placed as long as any
effects placed before it are bypassed before you use the HT-2. Therefore, we
recommend placing the HT-2 before the rest of your pedal effects so you don’t
have to bypass other effects on your pedal board just to tune.
To Next Page
Loading...