DigiTech HardWire HT-2 User Manual

9
Select A Tuner Reference
The HT-2 has multiple tuning references to select from: A=A 440 (standard
tuning), A=A flat (tuned half step down), A=G (tuned whole step down), and
alternate tuning references (A=A 437 - A=A 443). To select the tuner reference,
do the following:
1. Press the Foot Switch to turn on the tuner. A dash appears in the note
display.
2. Press the TUNING button. A t appears in the note display and the
LED above the current tuning reference lights. Press the TUNING
button to select the next tuning reference. The reference is a 1/2 step
down (A=A flat) if the LED above ♭ is lit. The reference is a whole step
down (A=G) if the LED above ♭♭ is lit.
3. Once the selected tuning reference LED is lit, wait 3 seconds and the
pedal returns to normal operation. The last tuning reference selected is
automatically saved.

DigiTech HardWire HT-2 Specifications

General

Brand	DigiTech
Model	HardWire HT-2
Category	Musical Instrument Amplifier
Language	English