The Metal Master is the world’s most advanced heavy metal distortion
pedal. DigiTech’s exclusive AudioDNA™ technology is what makes the
Metal Master more than your standard distortion stompbox. Rather
than working from a single distortion type circuit with tone controls, the
Metal Master features a Morph knob which blends between three totally
different metal distortion types. This gives you a wide variety of
different metal distortion sounds that can be dialed in quickly and easily.
1. Level Knob
Controls the effect’s output level. Turn this knob clockwise to increase
the output level, and counter-clockwise to decrease output level.
2. Low Knob
Controls the boost or cut of low frequencies. Turn this knob clockwise
to increase the low frequency content, and counter-clockwise to
decrease the low frequency content.
3.AC Adapter Jack
Connect a DigiTech PS200R power supply to this jack. Use the proper
supply for your area’s Mains line voltage
To Next Page
Loading...
