EasyManua.ls Logo

DigiTech METAL MASTER User Manual

DigiTech METAL MASTER
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the DigiTech METAL MASTER and is the answer not in the manual?

DigiTech METAL MASTER Specifications

Power IconPower
power supply9V Alkaline Dry Battery
power consumption4.8 Watts
battery lifeApproximately 4 hours
Electric Characteristics IconElectric Characteristics
input impedance1 MOhms
output impedance100 Ohms
optional power supply voltage100V ~ 50/60Hz, 120V ~ 60Hz, 230V ~ 50Hz, 240V ~ 50Hz
Weight and Dimensions IconWeight and Dimensions
weight1.38 lbs
length4 15/16 in
width3 1/8 in
height2 1/8 in

Summary

Important Safety Instructions

DigiTech Metal Master Controls

Level Knob

Controls the effect's output level, adjusting volume clockwise or counter-clockwise.

Low Knob

Adjusts the boost or cut of low frequencies, affecting bass content.

AC Adapter Jack

Port for connecting an external DigiTech PS200R power supply.

High Knob

Controls the boost or cut of high frequencies, affecting treble content.

Morph Knob

Blends between three distinct metal distortion voicings for tonal variety.

Input Jack

Connect your instrument here; engages battery power when a cable is inserted.

Pedal Release Pins

Spring-loaded hinges to release the pedal for battery compartment access.

Pedal

The foot switch used to turn the effect on and off.

Out 1 (Amp) Jack

Output for connecting to a guitar amplifier.

Indicator LED

Indicates when the effect is active; dimming suggests battery replacement.

Out 2 (Mixer) Jack

Output with cabinet modeling for direct connection to mixers or recorders.

Connections and Setup

Battery Replacement

Specifications

Related product manuals