DigiTech METAL MASTER User Manual

4. High Knob
Controls the boost or cut of high frequencies. Turn this knob clockwise
to increase the high frequency content, and counter-clockwise to
decrease the high frequency content.
5. Morph Knob
Morphs between the three different metal distortion voicings. The
minimum position is a smooth high gain tone. The 12 o’clock position is
a scooped midrange sound. The maximum position is a punchy mid
range heavy metal sound that really cuts through the mix. Experiment
with the knob’s different positions to hear the wide variety of distortion
tones.
6. Input Jack
Connect your instrument to this jack. Connecting a guitar cable to this
jack engages battery power even though the Indicator LED may not be
lit. To prolong battery life, disconnect all cables from the pedal when not
in use.

DigiTech METAL MASTER Specifications

Power

power supply	9V Alkaline Dry Battery
power consumption	4.8 Watts
battery life	Approximately 4 hours

Electric Characteristics

input impedance	1 MOhms
output impedance	100 Ohms
optional power supply voltage	100V ~ 50/60Hz, 120V ~ 60Hz, 230V ~ 50Hz, 240V ~ 50Hz

Weight and Dimensions

weight	1.38 lbs
length	4 15/16 in
width	3 1/8 in
height	2 1/8 in