26
EQ
The RP255’s EQ helps further shape your tone with Bass, Midrange, and Treble controls. To help
get you started, there are four preset EQ curves: Mid Boost (), Scoop (), Bright
(), and Warm () that can be selected using Knob 1. Bass, Midrange, and Treble
parameters range from -12dB to +12dB.
EQ Model - Knob 1 selects between 4 different EQ modes (Mid Boost, Scoop, Bright, and
Warm), each with different frequency centers for Mid and Treble. Pressing this knob turns
the EQ on and off.
Bass-Knob2 adjusts the amount of low end level (Bass).
Mid - Knob3 adjusts the midrange level.
Mid Freq (X-Edit
TM
only) - This parameter selects the frequency that the Mid parameter
adjusts. Ranges from 300 Hz to 5000 Hz.
Treb - Knob 4 adjusts the high end level (Treble).
Treb Freq (X-Edit only) - This parameter selects the frequency that the Treb parameter
adjusts. Ranges from 500 Hz to 8000 Hz.
Noise Gate
A Noise Gate is designed to eliminate noise while you are not playing, or provide an auto volume
swell effect.
Gate Model - Knob 1 selects between the DigiTech
®
noise gate or the volume swell effect.
Values include: (Selects the noise gate) and (Selects the volume swell effect.)
Press this knob to turn the noise gate on and off.
Threshold/SwellSensitivity-Knob2 sets the signal strength (Threshold) required to
open or close the Noise Gate, or the Swell Sensitivity for the Auto Swell. Both parameters
To Next Page
Loading...
Need help?
General
