32
Range - Knob 4 adjusts the throaty quality of the YaYa effect. Ranges from to .
Step Filter ()
The Step Filter is like an automatic “random wah” with a square waveform.
Speed-Knob2 adjusts the speed of the Wah effect. Ranges from to .
Intensity-Knob3 controls the intensity of the Wah effect. Ranges from to .
DigiTech Whammy™ ()
The DigiTech Whammy
TM
is an effect that uses an Expression Pedal to bend the pitch of the in-
coming signal, or add a bendable harmony with the original signal. As the Pedal is moved, the note
bends either up or down. When DigiTech Whammy is selected, it is automatically placed before
the Amp modeling as shown in the block diagram on page 19.
ShiftAmount-Knob2 selects the interval and direction of the pitch bend. Choices are
as follows:
Whammy
TM
(no Dry Signal)
(1 octave above)
(2 octaves above)
(a second below)
(a second below reversed pedal action)
(a fourth below)
(an octave below)
(2 octaves below)
(Dive Bomb)
HarmonyBends(Dry Signal Added)
(a minor third to a Major third)
(a second above to a Major third above)
(a third above to a fourth above)
(a fourth above to a fifth above)
(a fifth above to an octave above)
(one octave above)
(one octave down)
(octave up/down)
To Next Page
Loading...
Need help?
General
