33
PROGRAM AUTOLOAD
From the factory, the Studio Quad V2 ships with this option turned on. With the Program Autoload function turned
on, any time you change to a new Program, it is automatically loaded into active memory and begins performing its
function. With the function turned off, newly selected Programs must be loaded manually by pressing the <PRO-
GRAM> button after scrolling to the desired program using the Data Wheel.
This is a great feature for live sound reinforcement situations where the engineer can skip to a non-consecutive
Program number without hearing the effects of all the Programs in between.
To change the setting of the Program Autoload function, do the following:
• Press <UTILITY> and scroll to Page 6 of the Utility Menu using the <NEXT PAGE> and <PREVIOUS PAGE>
keys. The display reads:
• Use the Data wheel to turn the option on or off.
• When you're finished, you can return to Program mode by pressing <PROGRAM>.
HARMONY TUNING REFERENCE
When using Harmony intelligent pitch shifting, the Reference note pitch is set at A=440. If you wish to change the
reference note, you can access this function in the Utility menu. Reference can be set from A=427 to A= 453. The
procedure is as follows:
• Press <UTILITY>, scroll to page 7 of the Utility page using the <Prev Page> or <Next Page>buttons. The dis-
play reads:
• Using the Data wheel, you can modify the Reference note anywhere from A=427 to A=453.
• To exit Harmony Tuning Reference, Press <Program> button.
FACTORY RESET
Allows you to erase all User Program and Utility settings at once and restore the Studio Quad V2 memory to its
factory condition.
To perform a factory reset, do the following:
WARNING:This procedure will destroy and reset ALL User Programs in the Studio Quad V2's mem-
ory. Be sure you want to erase the memory, and start fresh before continuing with this procedure.
To Next Page
Loading...
Need help?
General
