EasyManua.ls Logo

DigiTech STUDIOVOCALISTEX - Specifications

DigiTech STUDIOVOCALISTEX
74 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPECIFICATIONS
Microphone Input Balanced XLR, 1 KOhm impedance, cardoid (directional) type preferred
Line Input Balanced or unbalanced 1/4" TRS, +4/-10 dB level (switchable),
10 KOhm impedance
Microphone Input Range @ 150 Ohm source impedance: minimum -35 dBu, maximum +1.5 dBu
Line Input Range Balanced input @ 50 Ohm source impedance: maximum +14.0 dBu
Line Outputs Balanced or unbalanced 1/4" TRS, stereo or mono, +4 dBu (can be
reduced by trimming Output Level fader)
Maximum output level +24 dBu @ .03% THD
Sampling A/D: 18 bit @ 48 KHz
Frequency Response (dry) 15 Hz to 20 KHz, +0/-1 dB
Signal to Noise >95 dB “A” weighted, auto gate engaged
Total Harmonic Distortion <0.025%
+ Noise
Size 3.25" H x 19" W x 6.75" D
83 mm H x 483 mm W x 171 mm D
Weight 8.15 lb.
3.7 kg.
Internal Lithium Battery Sony CR2032
Note: The lithium battery in the Studio Vocalist EX keeps a portion of
the memory powered to retain user settings. If you find that user pro-
grams or songs cannot be stored, or are lost when the Studio Vocalist EX
is turned off, this may be due to a dead battery. Take the Studio Vocalist
EX to a DigiTech dealer or service centre to have the battery replaced. In
normal use, a battery should last three to five years.
Specifications subject to change without notice
61

Related product manuals