DigiTech VOCALIST LIVE 2

23
The lead vocal is too loud.
Turn down the Mic/Line Input Level knob.
If you’re using a P.A. system or mixer, turn down the channel that the Vocalist
®
Live 2 is con-
nected to, or turn down the master level (volume) controls.
I don’t hear any harmonies.
Make sure the Harmony footswitch is pressed so that the LED just above it is lit.
Make sure the Harmony Mix knob is set somewhere between the 11 o’clock position and the
5 o’clock position.
The harmonies are too loud.
Turn the Harmony Mix knob counter-clockwise to lower the harmony level and increase the
lead vocal level.
The harmonies are too quiet.
Turn the Harmony Mix knob clockwise to increase the harmony level and decrease the lead
vocal level.
•
•
•
•
•
•