18
Selecting Harmony Part A or Part B
Pressing the Part A/B footswitch quickly will toggle
between the A and B Part of the Harmony Patch.
Selecting Patch using the Footswitch
Pressing and holding the footswitch will slowly step the Vocalist Live
3 through the Harmony Patches. Release the footswitch when the
desired Patch is reached.
Harmony Voicing
Each Voicing button sets the Voicing for one
of the Harmony Voices by cycling through the
Voicing options.
The Double option sets the Harmony Voice to “sing”
the same note as the lead voice. This provides a
rich doubling sound. By cycling through the options
until none of the options are lit, the corresponding
Harmony Voice is turned off completely.
Because musIQ
®
technology adjusts the harmony voices depending
on the singer’s note and the music being played on the guitar, it is not
possible to exactly specify the exact musical interval using the harmony
voicing controls. However, it may be convenient to think of the High
and Higher settings to be roughly a third and a fifth above the sung
note. Similarly, the Low and Lower settings can be thought of as being
roughly a third and a fifth below the sung note.
To Next Page
Loading...
Need help?
General
