22
on only as long as the footswitch is held. Once it is released, the
Harmony Voicings are bypassed. Select the desired mode using the
+/- buttons.
Low-cut Filter On/Off
Press Setup until LC appears
in the Display. This is the Low
Cut filter setup menu that lets
you turn the 75 Hz Low Cut
filter on or off.
After a moment the LC will
disappear and the Display
will show whether the Low
Cut filter is turned on or off.
Pressing the + or – buttons to
enable or disable the Low Cut
filter.
Chorus Depth
Press Setup until Cd appears in
the Display. This is the Chorus
Depth setup menu.
The Cd will disappear after a
second and a number from 1
to 10 will appear showing the
current Chorus Depth. Select
the desired Chorus Depth
using the +/- buttons.
To Next Page
Loading...
Need help?
General
