••• 6 •••
Connections
Live performance
The graphic below shows the typical connection scheme. Your voice is fed through the microphone
directly into Performer where it is harmonized and sent to your mixer/power amp. The output from
Performer can be either mono (one cable) or stereo (two cables).
Studio or alternate live setup
The graphic below shows how you can drive Performer with an effects send from your mixer. This
is useful if you want to add equalization to your voice before it is sent to Performer. If your mixer
has multiple effects sends, you could have different effects on your voice and the harmony voices.
This setup also allows you to add harmonies to a recorded vocal track. A vocal track recorded on a
ministudio, reel to reel or digital multitrack can be harmonized as if it was being sung live.
To Next Page
Loading...
Need help?
General
