SPECIFICATIONS
Microphone Input Balanced XLR, 1 KOhm
Line Input Unbalanced 1/4 TS, -10 dBV level, 2.2 KOhm
Microphone Input Range -39 dBV minimum to -17 dBV maximum
Line Input Range -29 dBV minimum to -7 dBV maximum
Line Outputs Unbalanced 1/4” stereo or mono, -10 dBV nominal
Sampling 16 bit A/D conversion @ 48 KHz
Frequency Response (dry) 20 - 20KHz
Signal to Noise >92 dB A weighted
Total Harmonic Distortion + Noise < 0.04%
Power Requirements 9 VDC, 500 mA, tip negative
Size 6.75” H x 6.8” W x 1.75” D
Weight 1 lb
Specifications subject to change without notice.
••• 11 •••