Temperature Humidity
Control Range -40~120
°
C, -40~248
°
F 1-100%RH
Temperature
Resolution
0.1
°
C, 0.1
°
F 0.1%RH
Temperature Accuracy ±0.3
°
C, ±0.3
°
F ±2%RH
Control Mode Heating and Cooling
Humidication and
Dehumidication
Input Power 100~240VAC, 50/60Hz
Temperature Control Output Max.10A, 100-240VAC Max.7A, 100-240VAC
Buzzer Alarm
High and Low Temperature
Alarm
High and Low humidity Alarm
Sensor Type Digital sensor
Sensor Length 2m, 6ft 2m, 6ft
Relay Contact Capacity
Heating
（
10A, 100-240VAC
）
Humidication
（
7A,100-
240VAC
）
Cooling
（
10A, 100-240VAC
）
Dehumidication
（
7A,100-
240VAC
）
Input Power Cable Length 120 cm/4ft
Output Power Cable Length 30cm/6.5”
Feature
• Large LCD screen;
• Dual relay output, be able to control heating / cooling equipment and
humidication / dehumidication device at the same time;
• Support reading with Centigrade or Fahrenheit unit;
• Maximum temperature output load: 1100W@110V, 2200W@220V;
• Easy to use and program, plug and play device;
• With temperature and humidity calibration function;
• Compressor delay protection for refrigeration control;
• High and low value alarms are available;
• Over-temperature and sensor fault alarm;
• Heating/cooling return dierence could be set separately to protect
temperature controller from violent change;
• The temperature or humidity function can be used separately.
Specication
To Next Page
Loading...
Need help?
General