DIGITEN DHTC-1011 User Manual (English)

Need help?

Do you have a question about the DIGITEN DHTC-1011 and is the answer not in the manual?

DIGITEN DHTC-1011 Specifications

General

Brand	DIGITEN
Model	DHTC-1011
Category	Controller
Language	English

Summary

Feature

Specification

Display

Setting Instruction

View the setting value

Learn how to check parameter values by pressing the SET button.

Change temperature unit

Switch between Fahrenheit and Celsius units by holding UP and DOWN buttons.

Set cooling mode

Instructions for configuring the controller for cooling operation.

Set heating mode

Instructions for configuring the controller for heating operation.

Set humidification mode

Instructions for configuring the controller for humidification operation.

Set dehumidification mode

Instructions for configuring the controller for dehumidification operation.

Setup Flow Chart

Function introduction

Time of compressor delay starting(DP)

Explains the delay time (DP) for cooling operations after power-on.

Calibration(CA)

Details how to correct temperature deviations using the calibration value (CA).

Troubleshooting

The load doesn't work

Guides on diagnosing and resolving issues where the load does not operate.

DIGITEN DHTC-1011 User Manual

Table of Contents