-6-
preset delay time, the equipment will start refrigeration immediately; when the
time interval between two refrigeration operations is less than preset delay
time, the equipment won’t start refrigeration until achieve the preset delay time.
Delay time will be recorded at the moment that refrigeration stops.
5.Temperature Calibration (CA)
When there is deviation between current temperature and actual temperature,
use temperature calibration function to correct the current temperature and
actual temperature. Corrected Temperature = Temperature (before Calibration)
+Corrected Value (corrected value could be positive value, 0 or negative
value).
6.Display in Fahrenheit or Centigrade unit (CF)
Users can select display with Fahrenheit or Centigrade temperature value
according to their own habit. Default setting is display with Centigrade
temperature value.
LCD Backlight Control
Press and SET buttons simultaneously about 3 seconds until the symbol
disappears, the LCD light will shut o automatically after 30 seconds.
Press and SET buttons simultaneously about 3 seconds until the LCD
appears , the LCD will be stay on.
Application
The thermostat can be used to control a wide variety of dual-stage refrigeration
and heating, or HVAC equipment. Typical applications include:
●Retail store display freezers and coolers
●Supermarket display cases for product/meats
●Retail store walk-in freezers and coolers
●Boiler operating control
●Condenser fan cycling or staging
●Cooling tower pump and fan control
●Space and return air temperature control
●Aquarium water temperature
●BBQ
●Over temperature control/protection
To Next Page
Loading...
