Digittrade RS128 - Locking and Unlocking the Hard Drive; Switching-On

36
English
Move the USB switch to use either the integrated
USB or the external USB. The DIGITTRADE RS128
HDD already preformatted in the NTFS le system.
To avoid unauthorized access to your sen-
sitive data the DIGITTRADE Security Hard
Drive RS128 is always locked and needs to be
unlocked for use.
Hold one of the two enclosed RFID keys above the
reception symbol of the hard drive.
The hard drive will be unlocked, if you hear a short
acoustic signal and the green LED ashs.
The hard drive will be identied by the system.
If you unplug the hard drive from the system it will
be unlocked again. Your data will immediately be
protected against unauthorized access.
Note: The hard drive also can be locked by holding
the key again over the reception symbol or by turning
it off.
Internal or external USB
Locking and Unlocking the Hard
Drive