Digitus DN-13006-1 - Wired Network with Print Server; Hardware Installation

2
Before you start, you should prepare the following items:
 One Windows-based PC with print server setup CD
 One printer
 One printer cable
 One HUB
Wired Network with Print Server:
Printer
Print Server
Computer Computer Computer
HUB
Hardware Installation:
1. Turn off the printer’s power.
2. Connect the print server to your printer with the supplied printer cable.
3. Turn the printer’s power on.
4. Plug the AC power adapter into the power connector on the print server.
5. Wait 10 seconds as part of the print server’s Power On Self Test (POST).