②
. Package Contents
If any item is missing, please contact the shop where you bought this
product.
- One Digitus DN-13007 or DN-13008 or DN-13018 USB 2.0 MFP
Server (x1)
- One MFP Control Center Software CD (x1)
- One DC IN 12V/1A Power Adaptor (x1)
③
. OS Requirements
I. Windows 2000/XP/2003/Vista
II. Unix, Linux , Apple OS X 10.3x, and RFC-1179 LPD System
④
. Physical Description
1. Power Adaptor Connector: DC IN 12V/1A adaptor
2. Init Button: restore the configurable parameters to the default
values
3. Wireless Station (only for DN-13018): IEEE 802.11 b/g wireless
station with antenna inside
4. Ethernet Connector: a twisted pair category 5 cable
5. USB Host Ports: USB 1.1/2.0 low, full, and Hi-Speed compliant
6. Indicators
Power Indicator is lit while power is applied. If it is not lit, or if
it blinks, there is a problem with the MFP server or Power
Adapter.
Link Status (only for DN-13007/DN-13008) is lit while network
is applied. If it is not lit, it indicates that this server does not
connect to the network.
Status Indicator (only for DN-13007/DN-13008) blinks to
indicate network activity.
LAN Indicator (only for DN-13018) blinks to indicate wired
network activity. If it is lit, it indicates the wired network is
applied. If it is not lit, it indicates that the server does not
connect to the wired network.
WLAN Indicator (only for DN-13018) blinks to indicate wireless
network activity. If it is lit, it indicates the wireless network is
applied. If it is not lit, it indicates that the server does not
connect to the wireless network.
USB1 Indicator is lit while a USB device connects to USB1 Port
2
To Next Page
Loading...
Need help?
General
