69
Passive Mode Select ‘Enable’ to use passive mode to send file, or select
‘Disable’ to not to use passive mode to send file.
Some FTP servers require passive mode, if you don’t
know, please ask FTP server’s administrator; most of
FTP servers will work fine with both modes, but if you
found that non-passive mode is not working, you can try
to use passive mode.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Upload a test file’ to send a file to the FTP server you
set here, so you can make sure the setting you specified here is correct and
working.
To Next Page
Loading...
