5
1.4 Connectors
Refer to the diagrams below for the positions of the default button and various
connectors of the camera. Definition of the default button and the connectors
are given as follow.
Pin Connector Definition
1 Alarm I/O
Alarm I/O connection
2 Default Button
Press the button with one figure for at least 20 seconds
to restore the system.
3 Audio I/O
Audio I/O connection
4 RJ-45
For network and PoE+ connections
5 Power (AC 24V)
Power connection
6 microSD Card Slot
Insert the microSD card into the card slot to store videos
and snapshots. Do not remove the microSD card when
the camera is powered on.
NOTE: It is not recommended to record with the microSD card for 24/7
continuously, as it may not be able to support long term continuous data
read/write. Please contact the manufacturer of the microSD card for
information regarding reliability and life expectancy.
To Next Page
Loading...
