15
4.1 Management interface
4.1.1 Status
Show the current status of the Master Router
4.1.2 Upgrade firmware
Click the UPGRADE FIRMWARE option, select the location where the
firmware will be stored, and click Upload to upgrade. Note: Do not power
off the device during this process.
4.1.3 Save/Reload setting
Click the SAVE/RELOAD SETTING option, and Save is to save the current
settings. The import function is to select the save configuration file. Click
Upload to import the configuration, and the user name and password of
the previous login setting page will be prompted before importing. The
Reset button is to restore the factory settings.
4.1.4 Password
Click the PASSWORD option to change in the message box. You can change
the login username and password according to your requirements (you
cannot use special symbols). After confirming, click Save & Apply.
To Next Page
Loading...