5
1.3.2. Know about the satellite repeater:
Press this button to allow the user device to connect to
this device via WPS within 2 minutes.
One LED is on: The signal is weak. The distance from the
nearest MESH device is far.
Two LED are on: The signal is stable. The distance from
the nearest MESH device is moderate.
Three LED are on: Strong signal. Close to the nearest
MESH equipment.
On: Device can’t connect with internet.
Off: Device connects with internet.
On: Self-test or system failure
Off: Device is working well.
Press this button for 5 seconds to return to the factory settings