8
Turn on the switch
The PoE switch can be used with AC power supply. Powering on the
switch, it will automatically initialize and its LED indicators will respond
as follows:
Firstly, the Power LED indicator will light up.
Then, the data LED indicators will flash momentarily for one second,
which represents a resetting of the system.
CE Mark Warning: This is a Class A product. In home environment, this
product may cause radio interference. In this case, the user may be
required to take appropriate measures.
Hereby Assmann Electronic GmbH, declares that the Declaration of
Conformity is part of the shipping content. If the Declaration of Conformity
is missing, you can request it by post under the below mentioned
manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid, Germany
To Next Page
Loading...
Need help?
General
