7
6. Installation Environment
Before installation, make sure that the proper working environment is
available, including power requirements, adequate space, proximity to
other equipment to be connected, and other equipment in place. Please
confirm the following installation requirements:
Ensure the stability of the workbench and good grounding;
Check whether cables and connectors required for installation are in
place (less than 100m).
Environment requirements: The operating temperature ranges
from 0°C to 40°C and the relative humidity ranges from 5% to 90%.
Desktop Installation
Install the Switch on a desktop, please attach these cushioning rubber feet
provided on the bottom at each corner of the Switch in case of the external
vibration. Allow adequate space for ventilation between the device and the
objects around it.
Wall-mounted installation
In the first two fixed screw on the wall as shown in the figure below
Aim at the two fixed hole switches, and the machine smoothly
on the screw
Provide two screws with a diameter of about m3 and
a nut diameter of 5mm
To Next Page
Loading...
Need help?
General
