Dimplex A8M User Manual

Millbrook House, Grange Drive, Hedge End, Southampton, SO30 2DF
0844 879 3587
dimplex.co.uk | gdcgroup.co.uk
44
6.1 Technical Specications
1
According to EN 12102.
2
Fan is variable speed, rated input relates to nominal input power.
T ECHNICAL S PECIFICATIONS
1 T
YPEAND ORDER CODE U NITS A8M A12M A16M
2 DESIGN
2.1 Degree of protection according to EN 60529 for compact
unit or heating element
IP 24
2.2 Installation Location Outside
3 PERFORMANCE DATA
3.1 Heating Water Operating Temperature Range (min 56/52 C° )xam /
Outside Air Operating Temperature Range (min / max) 03/02- C°
3.2 Heat Output / COP
Heating Water Temperature Difference
@ Standard Rating Condition
These figures characterise the size and performance of
the system according to EN 14511. Abbreviations have
the following meaning, e.g. A7 W35: Outside temperature
7°C and heating water supply temperature 35°C .
@ A7W35 kW/--- 6.30 / 4.42
12.30 / 4.72 12.30 / 4.72
@ A7W55 kW/--- 6.2 / 3.1 12.5 / 3.2 12.5 / 3.2
@ A7W65 kW/--- 6.3 / 2.7 12.4 / 2.6 12.4 / 2.6
@A-2W35 kW/--- 6.7 / 2.9 12 / 3.3 15.5 / 3.2
@A-2W55 kW/--- 7.1 / 2.1 12.0 / 2.5 15.6 / 2.4
@ A-7W35 kW/--- 7.0 / 2.9 12.0 / 3.0 13.2 / 3.0
@ A-7W55 kW/--- 7.1 / 2.1 12.0 / 2.2 15.3 / 2.2
3.3 Sound Power Level
1
dB(A) 63 63.5 63.5
3.4 Sound Pressure Level @ 10m (Heat Pump positioned
against wall)
dB(A) 41.5 38.5 38.5
3.5 Heating Water Flow Rate @ A7W35, nominal / minimum m³/h 1.15 / 0.85 2.1 / 1.2 2.1 / 1.2
3.6 Condenser Pressure Drop @ nominal flow rate (A7W35) kPa 3 4 4
3.7 Air Flow @ A7W35 m³/h 2600 3700 3700
3.8 Refrigerant; total filling weight Type/kg R410A / 1.75 R410A / 2.0 R410A /
2.0
3.9 Water Capacity of Stainless Steel Heat Exchanger litre 0.85 1 1
3.10 Polyol Ester Oil in Compressor 81.1 ertil
4 DIMENSIONS, CONNECTIONS & WEIGHT
4.1 Device Dimensions Without Connections H x W x L (mm) 1260 x 932 x 401 1571 X 932 X 401
4.2 Physical Volume 95.0 5.0 ³m
xe ”1 hcni metsyS gnitaeH ot snoitcennoC eciveD 3.4 t. thread
4.4 Weight of the Transportable Unit (Excluding Pac 031 011 gk )gnigak
5 ELECTRICAL CONNECTIONS (HEAT PUMP)
1 / V032 - ycneuqerF / esahP / egatloV lanimoN 1.5 ph / 50 Hz 230V / 1ph / 50 Hz
5.3 Nominal Power Consumption / Nominal Current @
A7W35
kW/A 1.4 / 6.3 2.6 / 11
5.4 Maximum Power Consumption / Maximum Current
@ A-2W55
kW/A 4 / 16 6.9 / 30 8.1 / 35
5.5 Maximum Starting Current - Inverter Ramp Up
A5.2 tnerruC gnitratS laudarG A
5.6 Power Factor A7W35 / (cos )
-
0.94 0.95 0.95
5.7 Power Input of Integral Fan @ A7W35
2
06 06 05 W
6 OTHER DESIGN CHARACTERISTICS
6.1 Defrosting Mode / Type Automatic / Reverse Cycle
6.3 Device Freeze Protection Yes : Heating Water in Device Protected Against Freezing by Software
5.2 Fuse Protection 04 C 02 C

Dimplex A8M Specifications

General

Brand	Dimplex
Model	A8M
Category	Heat Pump
Language	English