13
ERROR CODES
OVERHEAT PROTECTION
This unit is tted with an overheat prevention device. If the unit overheats it
will automatically turn off. The unit can be restarted after 30 minutes.
ERROR CODES
Error codes are shown on the display should a fault occur.
E1: Indicates open circuit or short circuit in the room temperature sensor.
E2: Indicates open circuit or short circuit in the pipe temperature sensor.
E4: Indicates the internal water container is full. Refer to WATER DRAIN.
If error code E4 persists, please contact an authorized service centre.
NOTE: Never try to repair or dismantle the air conditioner yourself.
Unauthorized repairs may result in the loss of warranty and can endanger
the user and their property.
To Next Page
Loading...
