EasyManua.ls Logo

Dimplex GDDEKD9 - Drainage Procedures; Water Tank Full Indicator; Emptying the Water Tank

Dimplex GDDEKD9
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 11 –
4. Tip Over protection: This unit is equipped with a tilt switch for overheat protection.
If the unit is tipped, the unit will stop automatically. The ON indicator will turn RED
and blink as a warning, also the display window will show E5.
After repositioning the unit upright, press the POWER button to re-start.
5. Self-Diagnosis: This machine is equipped with a self-diagnosis function. If
something is wrong with the machine, the LED will display Error E1 to E7 (each
represents a different situation).
E5 means the unit is tipped over. Please reposition the unit upright, press POWER
button to re-start.
For other errors, please call Glen Dimplex or your service centre. DO NOT
dismantle the machine by yourselves in any case.
DRAINAGE
While the water tank is full, the unit will stop working for self-protection. The water full
indicator will blink in red and the unit will buzz a warning.
To empty the tank, please follow these steps:
1. Hold the unit with one hand to steady it.
2. Pull out the tank squarely from the unit.
3. Remove the cover of the tank and carry it by its handle to empty the water.
4. After the tank is emptied, replace the tank cover and reinsert the water tank to the
dehumidifier. Make sure it is properly positioned, so the ‘water full’ indicator light
goes out and your dehumidifier is operating as normal again.
Please note, if the water tank has not been positioned correctly, the water full
indicator will stay red and the unit will keep buzzing.
14
Drainage
Whilethewatertankisfull,theunitwillstopworkingforself-protection. Thewaterfull
indicatorwillblinkinredandtheunitwillbuzzawarning.
Toemptythetank,pleasefollowthesteps:
1. Holdtheunitwithonehandtomakeitstandfirmly.
2. Pulloutthetanksquarelyfromtheunit.
3. Graspthewatertankhandle,removethecoverofthetank,emptythewaterfromthe
drain.
4. Afterthetankisemptied,returnthewatertanktoitsposition,makesureitisproperly
positioned,sothe'waterfull'signgoesoutandyourdehumidifierisoperatingas
normalagain.
Pleasenote,ifthewatertankhasnotbeenpositionedcorrectly,thewaterfullindicator
willturnredandtheunitwillkeepbuzzing.

Related product manuals