To Next PageTo Next PageWhy does the circuit breaker trip when I turn on my Dimplex IGNITE XL BOLD?
If the circuit breaker trips or a fuse blows when you turn on your Dimplex Indoor Fireplace, it might be due to an improper circuit current rating. To resolve this, install the unit on a dedicated circuit with a minimum 15 amp rating.
How to fix Dimplex IGNITE XL BOLD Indoor Fireplace that does not turn on?
If your Dimplex Indoor Fireplace does not turn on with the manual touch controls, the issue might be due to a lack of incoming power. Ensure the unit is wired correctly, check the main disconnect panel, and verify that the wall switch is on (if applicable).
What to do if Dimplex IGNITE XL BOLD Indoor Fireplace remote control not working?
If your Dimplex Indoor Fireplace doesn't turn on with the remote control, the batteries in the remote may be dead or installed incorrectly. Replace the remote control battery, ensuring it is installed with the + side facing up.
Guidance on optimal positioning and clearance requirements.
Safety precautions for installing in a bathroom environment.
Steps for preparing the firebox before final installation.
Step-by-step guide for framing and mounting the fireplace.
Detailed instructions for wiring the fireplace.
Wiring instructions for 120V power supply via hardwiring.
Wiring instructions for 120V power supply with a wall switch.
Wiring instructions for 240V power supply via hardwiring.
Procedure to permanently disable the heater and fan.
Steps for installing the mirrored glass panel.
Steps for installing the side glass panels.
Steps for installing the front glass panel.
Overview of how the fireplace operates with Comfort$aver™ technology.
Information on using the infrared remote control.
How to turn the heater on and off.
Procedure for resetting the unit after a thermal cutout event.
Solutions for the fireplace not turning on via touch controls.
Solutions for the fireplace not responding to the remote.
Troubleshooting steps when the heater fails to activate.
Resolving problems with circuit breakers tripping or fuses blowing.
Explanation and solutions for various error codes displayed.
Details of the 5-year limited warranty for Ignite XL Bold™ products.
Specifies what parts and labor are covered and for how long.
Guidance on optimal positioning and clearance requirements.
Safety precautions for installing in a bathroom environment.
Steps for preparing the firebox before final installation.
Step-by-step guide for framing and mounting the fireplace.
Detailed instructions for wiring the fireplace.
Wiring instructions for 120V power supply via hardwiring.
Wiring instructions for 120V power supply with a wall switch.
Wiring instructions for 240V power supply via hardwiring.
Procedure to permanently disable the heater and fan.
Steps for installing the mirrored glass panel.
Steps for installing the side glass panels.
Steps for installing the front glass panel.
Overview of how the fireplace operates with Comfort$aver™ technology.
Information on using the infrared remote control.
How to turn the heater on and off.
Procedure for resetting the unit after a thermal cutout event.
Solutions for the fireplace not turning on via touch controls.
Solutions for the fireplace not responding to the remote.
Troubleshooting steps when the heater fails to activate.
Resolving problems with circuit breakers tripping or fuses blowing.
Explanation and solutions for various error codes displayed.
Details of the 5-year limited warranty for Ignite XL Bold™ products.
Specifies what parts and labor are covered and for how long.
General| Model | IGNITE XL BOLD |
|---|---|
| Category | Indoor Fireplace |
| Flame Technology | LED |
| Installation | Built-in |
| Control | Remote Control |
| Remote | Yes |
| Color | Black |
| Flame Effect | Yes |
| Adjustable Flame Brightness | Yes |
| Adjustable Flame Speed | Yes |
| Timer | Yes |
| Thermostat | Yes |
| Fuel Type | Electric |
| Volts | 120V |
| Power Supply | Electric |
| Width | 50.25 inches |
