To Next PageTo Next PageWhat to do if the Dimplex Opti-myst OMWFC20 E flame effect will not start?
If the Dimplex Stove flame effect doesn't start, first ensure the mains plug is correctly plugged into the wall socket. Also, check that the water tank is full, and there's water in the sump. Verify that the transducer connector is properly inserted and that the Transducer Unit is correctly seated in the sump's molded recess.
How to fix the Dimplex Stove flame effect if it is too low?
If the flame effect on your Dimplex Stove is too low, you can increase it by adjusting the FIRE setting on the remote control. Additionally, the metal disc in the transducer might be dirty, so clean it with the soft brush provided. Finally, ensure the wire from the Transducer Unit is directed to the back of the sump, sitting in the side slot exiting the sump, and not over the metal disc.
Why does my Dimplex Opti-myst OMWFC20 E have an unpleasant smell?
If your Dimplex Stove emits an unpleasant smell during use, it might be due to dirty or stale water. Clean the unit as described under maintenance. Also, ensure you are using only filtered tap water, as unfiltered tap water can cause this issue.
What to do if Dimplex Stove flame effect has too much smoke?
If the Dimplex Stove flame effect produces too much smoke, decrease the level of flame by changing the FIRE setting on the remote control.
Basic precautions to reduce the risk of fire, electrical shock, and injury to persons during use.
Details on flame effect, heating capabilities, required clearances, and water usage.
Information on heat output (kW) for different voltages and standby power consumption.
Steps for securely installing the appliance to the wall and ensuring correct positioning.
Procedure for correctly connecting the transducer unit within the main sump.
Instructions for filling the water tank with filtered water to activate the flame effect.
Explanation of the manual switches for power, flame effect, and standby mode.
Guide to using the remote control for switching the appliance on/off and adjusting settings.
How to select and adjust the flame effect intensity using the remote control.
Instructions for activating and selecting the heat output level (OFF, LO, HI).
Details on setting the desired room temperature for automatic heating control.
Information about the overheat protection and recovery procedure.
Step-by-step instructions for setting the current date and time on the appliance.
Overview of User Timer, Manual Mode, and Frost Protection modes.
Guide to customising timer slots for different days and temperatures.
How to operate the appliance in Manual Mode for constant heating.
Using the Frost Protection mode to maintain a minimum room temperature.
Tips for optimizing the flame effect and managing water consumption.
How to change temperature units (°C/°F) and adjust the maximum temperature set point.
Explanation of the Adaptive Start function for efficient room heating.
Advice on water usage, appliance storage, and general care.
Procedure for replacing the internal lamps if the flame effect is dim or absent.
Instructions for cleaning the exterior and internal components with soft cloths.
Detailed steps for cleaning the water tank and its cap and seals.
How to clean the sump assembly, including the metal disc.
Instructions for cleaning or replacing the air filter.
Details on the product warranty, consumable items like the transducer, and service.
Information on the proper disposal and recycling of electrical products.
List of patents and patent applications protecting the Optimyst range products.
A guide to identifying and resolving common symptoms, causes, and corrective actions.
Basic precautions to reduce the risk of fire, electrical shock, and injury to persons during use.
Details on flame effect, heating capabilities, required clearances, and water usage.
Information on heat output (kW) for different voltages and standby power consumption.
Steps for securely installing the appliance to the wall and ensuring correct positioning.
Procedure for correctly connecting the transducer unit within the main sump.
Instructions for filling the water tank with filtered water to activate the flame effect.
Explanation of the manual switches for power, flame effect, and standby mode.
Guide to using the remote control for switching the appliance on/off and adjusting settings.
How to select and adjust the flame effect intensity using the remote control.
Instructions for activating and selecting the heat output level (OFF, LO, HI).
Details on setting the desired room temperature for automatic heating control.
Information about the overheat protection and recovery procedure.
Step-by-step instructions for setting the current date and time on the appliance.
Overview of User Timer, Manual Mode, and Frost Protection modes.
Guide to customising timer slots for different days and temperatures.
How to operate the appliance in Manual Mode for constant heating.
Using the Frost Protection mode to maintain a minimum room temperature.
Tips for optimizing the flame effect and managing water consumption.
How to change temperature units (°C/°F) and adjust the maximum temperature set point.
Explanation of the Adaptive Start function for efficient room heating.
Advice on water usage, appliance storage, and general care.
Procedure for replacing the internal lamps if the flame effect is dim or absent.
Instructions for cleaning the exterior and internal components with soft cloths.
Detailed steps for cleaning the water tank and its cap and seals.
How to clean the sump assembly, including the metal disc.
Instructions for cleaning or replacing the air filter.
Details on the product warranty, consumable items like the transducer, and service.
Information on the proper disposal and recycling of electrical products.
List of patents and patent applications protecting the Optimyst range products.
A guide to identifying and resolving common symptoms, causes, and corrective actions.
General