Dimplex PLXC300E - Settings Menu Navigation; Heater Lock Configuration; Boost Lock Settings; Advance Lock Settings

21
Settings
To navigate to the settings menu, from the home screen:
Press the Menu button to access the Main Menu. Use the
Up / Down buttons to highlight ‘Settings’, then press the
Enter button. Each of the following headings relate to
an item in the settings menu.
ADVANCE
MENU
BACK
ENTER
Main Menu
Boost
Modes
Settings
Settings
Heater Lock
Boost
Setback
Date / Time
Sound
v
Set Lock
Heater (PIN) Lock can be enabled here by highlighting ‘Heater Lock’ and pressing Enter to enter the Heater
Lock menu. Highlight ‘Set Lock’, press Enter, enter a 4-digit PIN code, then press Enter to lock the heater.
Lock Settings
Before PIN Lock is enabled, the User can select ‘Lock Settings’ to enable/disable the Advance and/or Boost
functions, as well as enable/disable modification of the Boost Temperature and Boost Duration. See below.
Boost Lock
Three settings can be modified within this Menu:
• Enable / Disable - The ‘Boost’ Menu Item can be Enabled/Disabled while PIN Lock is active.
• Temperature Rule - Modifiable Boost Temperature while PIN Lock is active
- Enable – While Boost is active, the User can modify this value as they normally would
- Disable – Default value will be loaded. When the user tries to modify the value, the UI will
show the following text: ‘Disabled’.
• Duration Rule - Modifiable Boost Duration while PIN Lock is active.
- Enable – While Boost is active, the User can modify this value as they normally would
- Disable – Default value will be loaded. When the user tries to modify the value, the UI will
show the following text: ‘Disabled’
Advance Lock
• Enable / Disable - This setting allows the User to Enable or Disable the Advance button while UI
Lock is active.
Heater Lock