24
Advanced Settings
These settings can be used to signicantly change the operation of the heater. While useful for very specic
requirements, there is a much higher risk of User error and unintended consequences of changing these settings
compared to the top-level settings menu. It is recommended that these settings are only modied by trained
professionals.
To navigate to the Advanced settings menu, from the home screen:
Press and hold Advance and Menu buttons for 5 seconds.
Each of the following headings relate to an item in the settings menu.
Temperature Settings
Temp Units (Temperature Units)
This setting denes which temperature units are displayed on the heater. The default is °C, but °F can be set. When
°F is selected, the heater will covert °C values to °F and round to the nearest number.
Service Settings
Room Temp (Temperature) Offset
• Panels and Storage Heaters
• Service personnel use only.
• Allows the manual adjustment of electronic thermostat reading by +/-0.2°C
Factory Reset
This setting allows the User to restore the default values to all settings. Returning the product to the same state
that it left the factory.
To Next Page
Loading...
Need help?
General
