- 14 -
User Info
SP Range
Factory
Extra Charge
User Information
Press and hold the Selector Dial to display the User
Information menu, three choices are available;
SP Range - enables adjustment of the temperature
range available. Maximum range 7°C to 30°C.
Factory - return all settings to the factory presets - Yes or No.
Extra Charge - forces an extra charge of up to four
hours during off-peak periods.
If the output of the heater is not able to deliver the
required comfort level then it is possible to force the
heater to store additional energy. In this way more
electrical energy is stored during the off-peak period
and this will increase comfort levels. Up to four hours
additional off-peak charging can be selected.
NOTE: The extra charge option will lead to more energy
being stored during the off peak period, this will lead
to higher running costs. Only use this setting when a
room is consistently below the required temperature
and you are sure that the timer mode is set up and
selected correctly.
To Next Page
Loading...
