- 7 -
Control Functions
The heater controls can easily be adjusted by using a
combination of the three buttons and the selector dial,
which can be rotated and pressed.
1. The DISPLAY SCREEN shows the options available
at each stage of the adjustment.
2. MENU displays the main options list;
Date / Time - Setting today’s date / time.
Timer Mode - Setting the timer to your individual
requirements.
Boost - Selecting boost element operation.
Options - Temperature units and ‘Daylight
Saving’ settings.
3. BACK shows previous programming stage.
4. The periods during which the heater is providing heat
are defi ned as ‘Comfort On’ (this is shown at the bottom
of the screen). Outside of these periods the heater will not
deliver heat and these periods are called ‘Comfort Off’.
During the ‘Comfort On’ periods the low speed fan will
run. During the ‘Comfort Off’ periods the fan will not run.
If the heater is ‘Comfort Off’ and heat is required , press
the ADVANCE button. If the heater is ‘Comfort On’ and
heat is not required, press the ADVANCE button and it
will go off until the beginning of the next ‘Comfort On’
period.
5. SELECTOR DIAL can be turned clockwise and anti-
clockwise and enables the required room temperature to
be adjusted. The screen colour changes for warmer and
cooler settings, showing deep blue through to bright red.
To check what setting the heater is currently using press
the Selector Dial once and the timer mode will be
displayed e.g. ‘Out All Day’.
6. ADVANCE overrides the time settings and changes
the operational state of the fan, which will remain ON
until the next OFF period is due, or OFF until the next
ON period is due.
The Selector Dial is also used within the menu options
to select and confi rm your settings.
1
2
3
6
5
4
To Next Page
Loading...
Need help?
General
