- 24 -
First Time Power-On
A setup wizard will display when the product is powered on for the first time. This will set the following:
• Time, Date, Daylight Savings Time
• Sound On/O
For information on using the Heaters controls, refer to page 26. The Heater will then take the User to the Home
Screen with the ‘Out All Day’ Timer Mode active.
IMPORTANT
During initial heat-up, some odour may be emitted due to the newness of materials used in manufacture. This is
normal and will disappear after a short period of use, It is however advisable to keep the room well ventilated
To Next Page
Loading...
