Customer Name Installer Name
Address Installer Phone #
Quantum - Quick Set-Up Sheet and Settings Records
General Settings
MENU button displays < Date/Time - Timer Mode - Option >
OPTIONS AVAILABLE SETTINGS RECOMMENDATIONS
TECHNICIAN
TO INPUT
DATE / TIME
• Select Date /Time by pressing the selector
dial
• Rotate the dial to select the correct day and
press the centre of the dial to select
• Rotate the dial to select the correct day of
the month and press the centre of the dial to
select
• Repeat until DATE and TIME have been set
and the Display returns to the Main Menu
Write down Date &
Time in next box
CHOOSING
AND
SETTING A
TIMER MODE
• Work Week – if you typically work 5 days a
week during the day
• Home all Day – has pre-set times Monday to
Sunday which can be altered if desired
• Holiday – pre-programmed for 13 days at
10°C/50°F – set the number of days (from
1 to 160) and temperature required (from
7°C/45°F to 30°C/86°F)
• Manual – Four time slots are available and
can be customized for each day of the week,
set “comfort on” for at least 2 hours to take
some off-peak charge
Work Week
Or
Home all Day
□
Work Week
□
Home
□
Holiday
□
Manual
BOOST
• No Boost
• 1-4 hours
• Auto Boost
• No Boost - (lowest
operating cost)
• Auto Boost -
(highest comfort
level)
□
No Boost
□
1 hour
□
2 hours
□
3 hours
□
4 hours
□
Auto Boost
OPTIONS
• DTS Rule – Daylight Saving Setting
• TEMP Units - °C or °F
• Setback temperature – Comfort OFF tem-
perature
• Canada & US
• °C or °F
• No more than a
2°C setback is
recommended for
living areas
□ Canada
□ °C □ °F
_______°C