14 www.dimplex.com
Electrical
Before installing the wall switch:
• Connect a 3-conductor wire with
ground (4 wires total) from the
power supply panel to the main
switch wall box.
• Connect a 3-conductor wire with
ground (4 wires total) from the main
switch wall box to the junction box
on the built-in electric firebox.
Wall Switch (240 V)
NOTE: Use a double pole, single
throw (On/Off) wall switch that is rated for a
minimum of 15 A.
FIREPLACE JUNCTION BOX
WHITE - N
BLACK - L1
GROUND - G
WHITE - N
BLACK - L1
GROUND - G
240 V
POWER
SUPPLY
BREAKER
PANEL
RED - L2
RED - L2
BLUE - NH
WALL
SWITCH
G
L1
N
L2
G
L2
N
L1
!!
To Next Page
Loading...
