Dimplex Revillusion RBF30 - Installation; Framing Requirements

7
Installation
RBF30 RBF36 RBF36P RBF42
A 12 1/2" (318 mm) 12 1/2" (318 mm) 12 1/2" (318 mm) 12 1/2" (318 mm)
B 30 5/8" (778 mm) 36 5/8" (930 mm) 36 5/8" (930 mm) 42 5/8" (1083 mm)
C 26 3/16" (665 mm) 26 3/16" (665 mm) 30 5/8" (778 mm) 30 5/8" (778 mm)
D 25 3/4" (654 mm) 25 3/4" (654 mm) 30 1/4" (768 mm) 30 1/4" (768 mm)
E 12" (306 mm) 12" (306 mm) 12" (306 mm) 12" (306 mm)
F 29 3/8" (746 mm) 35 3/8" (898 mm) 35 3/8" (898 mm) 41 1/2" (1053 mm)
G 31 1/8" (792 mm) 37 1/8" (944 mm) 37 1/8" (944 mm) 43 1/4" (1098 mm)
H 22 3/4" (578 mm) 22 3/4" (578 mm) 27 1/4" (691 mm) 27 1/4" (691 mm)
I 26 5/8" (6764 mm) 26 5/8" (674 mm) 31" (788 mm) 31" (788 mm)
J 54 1/4" (1378 mm) 60" (1524 mm) 60" (1524 mm) 66 1/2" (1689 mm)
K 38 1/2" (978 mm) 42 1/2" (1080 mm) 42 1/2" (1080 mm) 47" (1194 mm)
L 38 1/2" (978 mm) 42 1/2" (1080 mm) 42 1/2" (1080 mm) 47" (1194 mm)
Rough-In Framing Dimensions Firebox Dimensions Rough-In Corner Dimensions
Framing
1. The Revillusion
TM
Built-in Electric
Firebox does not require any special
venting.
2. Rough in the framing opening.
Following the recommended framing
dimensions below.
!
NOTE: The materials used for the nished surround must be cut to precise dimensions
(dimensions B & C) as the 1/4" (0.6 cm)
self trimming ange is only to create a nished
appearance.
G
F
I
H
E
D
J
K
L
C
B
A