To Next PageTo Next Page
Need help?Do you have a question about the Dimplex Revillusion RBF24DLX and is the answer not in the manual?
General| Type | Electric Fireplace |
|---|---|
| Model | RBF24DLX |
| Size | 24 inches |
| Power Source | Electric |
| Installation | Built-in |
| Fuel Type | Electric |
| Voltage | 120V |
| Heating Area | Up to 400 sq. ft. |
| Flame Color | Multi-color |
| Control Type | Remote Control |
| Flame Brightness Adjustment | Yes |
| Timer | Yes |
| Overheat Protection | Yes |
| Log Set Included | Yes |
| Flame Effect | Revillusion Flame Effect |
| Wattage | 1500W |
| Flame Technology | Revillusion |
| Media | LED |
General safety guidelines to reduce risks of fire, shock, and injury.
Specific warnings regarding batteries, opening the unit, and servicing.
Details on FCC rules for digital device interference and compliance.
Technical electrical requirements including voltage, amps, watts, and wiring.
Physical measurements for both RBF24DLX and RBF24DLXWC models.
Specifies the acceptable operating temperature range in Fahrenheit and Celsius.
Provides detailed rough-in framing dimensions for RBF24DLX and RBF24DLXWC models.
Step-by-step instructions for installing the front glass panel.
Covers zero clearance design and placement near combustible materials.
Specific electrical and installation precautions for bathroom environments.
Outlines plug-in convenience, hard wiring option, and wiring compliance.
Details the importance of proper grounding for safety and preventing electric shock.
Instructions on how to permanently disable the heater by removing a jumper.
Guidance on securing the power cord and connecting to a 120V circuit.
Steps to remove the power cord for hardwire installation.
Steps for safely wiring the fireplace using a hardwire connection.
Instructions for connecting the unit directly to a 120V power supply.
Explains wiring requirements for a 120V wall switch installation.
Detailed steps for connecting the fireplace to a 120V wall switch.
Explains the ComfortSaver technology and heater operation modes.
Describes how to use the unit's front panel controls and remote.
Details how to turn the unit on/off and activate previous states.
How to control the log set, flame effect, and color themes.
Adjusting heater temperature, flame speed, and 360° light.
Using the sleep timer and ambient light sensor for operation.
Adjusting LED light brightness and flicker settings.
Toggling between Normal, Eco, and Boost heat modes.
How to increase temperature and change between F and C units.
Turning heat on/off and locking/unlocking manual controls.
Procedures to reset the heater if it overheats.
Regular inspection and cleaning of logs, grate, and base.
Instructions for cleaning the reflector screen without damage.
Steps to replace the battery in the multi-function remote control.
Details which products and regions are covered by the warranty.
Lists conditions and products not covered by the warranty.
Explains the 2-year and 1-year coverage periods for different parts.
Lists specific issues like misuse, accident, or incorrect installation that void warranty.
Provides contact information and requirements for warranty service.
Outlines what Glen Dimplex Americas will do in case of a defect.
Specifies limitations on liability for indirect or consequential damages.
Explains how local laws affect the warranty terms.
