EasyManua.ls Logo

Dimplex Tango - User Manual

Dimplex Tango
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
The product complies with the European Safety Standards EN60335-2-30 and the European Standard Electromagnetic Compatibility (EMC) EN55014, EN60555-2
and EN60555-3. These cover the essential requirements of EEC Directives 2006/95/EC and 2004/108/EC
08/59000/0 Issue 0
TANGO STOVE
Question and Answer IconNeed help?

Do you have a question about the Dimplex Tango and is the answer not in the manual?

Dimplex Tango Specifications

General IconGeneral
BrandDimplex
ModelTango
CategoryStove
LanguageEnglish

Summary

Important Safety Advice

General Safety Precautions

Reduce risk of fire, shock, and injury. Do not use outdoors or near water. Avoid covering or obstructing air circulation.

Use and Placement Guidelines

Ensure safe operation by keeping combustibles 1 metre away. Position for accessible plug and avoid deep pile carpets.

Product Operation and Features

General Information

Unpack carefully, retain packaging. Models are free-standing. Flame effect can be used independently or with heating.

Controls Overview

Three switches control power, 1kW, and 2kW heat output. Ensure main power switch is ON for operation.

Lamp Replacement Procedure

Access lamps by removing back panel screws. Unscrew defective lamp, replace with 60W E14 SES Clear candle lamp.

Thermal Safety Cut-out

Built-in overheat protection automatically switches off the appliance in case of a fault. Allow cooling before restarting.

Maintenance and Service

Cleaning Instructions

Always disconnect from power before cleaning. Use a soft duster; avoid abrasive cleaners. Clean glass screen with a soft cloth.

Recycling Information

Do not dispose of as unsorted waste. Use separate collection facilities to prevent environmental pollution.

After Sales Support

Contact Glen Dimplex for warranty, after-sales service, or assistance. Visit website for details.

Electrical Connection

Supply Requirements

Appliance must be earthed. Use AC supply only, matching the voltage marked on the heater. Read safety warnings.

Related product manuals