Dimplex VFE 20 User Manual

www.dimplex.eu 2202/D EN-19
Operation English
9.2. Main menu
Other setting options are shown in the main menu.
 Hold down the MENU key. The display initially
switches to the CHARGING menu. Continue to
hold the key (for approx. 3 seconds in total). The
display switches to the main menu.
 Tap on the MENU key briefly again. The supple-
mentary heating symbol flashes.
 Use the  keys to select one of the adjusters
described below:
A - Supplementary heating on/off
B - Timer (week program)
D - Frost protection temperature 7° C
E - Set the time and date
Supplementary heating
NOTE
i
The function set out below does not apply for wall-
mounted room thermostats.
NOTE
i
This function can only be used if a supplementary
heating (accessory) is installed.
Supplementary heating ON
 Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
 Press the MENU key.
The SUPPLEMENTARY HEATING symbol flashes.
 Press the ENTER key. OFF flashes.
 Press the  key. ON flashes.
 Press the ENTER key. Switch-on duration flashes.
 Define the switch-on duration with the  key.
 Press the ENTER key. Temperature flashes.
 Use the   keys to set the desired comfort tem-
perature.
 Press the ENTER key. Setting is complete.
Supplementary heating OFF
 Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
 Press the MENU key.
The SUPPLEMENTARY HEATING symbol flashes.
 Press the ENTER key. ON flashes.
 Press the  key. OFF flashes.
 Press the ENTER key. Setting is complete.
NOTE
i
If the supplementary heating is controlled via a wall-
mounted room thermostat, the conversion set item
no. 459270.28.61 must be integrated.
1 2 3 4 5 6 7
A B C D E
1 2 3 4 5 6 7

Dimplex VFE 20 Specifications

General

Brand	Dimplex
Model	VFE 20
Category	Heater
Language	English