Dimplex VFE 20 User Manual

EN-22 2202/D www.dimplex.eu
English Operation
Key tone ON/OFF
The key tone set at the factory for confirming an entry
can be switched off.
 Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
 Press and hold the MENU key and  key for ap-
prox. three seconds.
 Use the   keys to select the KEY TONE sym-
bol. The symbol flashes.
 Press the ENTER key. The ON symbol flashes.
 Press the  key. OFF flashes.
 Press the ENTER key. Setting is complete.
P5 – Temperature in energy saving mode
NOTE
i
The function set out below does not apply for wall-
mounted room thermostats.
Display or change temperature value.
 Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
 Press and hold the MENU key and  key for ap-
prox. three seconds.
 Use the   keys to select display P5. P5 flashes.
 Press the ENTER key. OFF flashes.
 Use the  keys to select ON. ON flashes.
 Press the ENTER key. Display P5 down flashes.
 Press the ENTER key. Display e.g. 16 °C flashes.
 Use the   keys to select the temperature value
for energy saving mode.
 Press the ENTER key. Setting is complete.
P7 – Correction of room temperature value
NOTE
i
The function set out below does not apply for wall-
mounted room thermostats.
NOTE
i
Only change if the value displayed can be proven to
depart from the actual room temperature.
 Press and hold the MENU key for approx. three
seconds.
The display switches to the main menu.
 Press and hold the MENU key and  key for ap-
prox. three seconds.
 Use the   keys to select display P7. P7 flashes.
 Press the ENTER key. 0 °C flashes.
 Use the   keys to set the correction value.
 Press the ENTER key. Setting is complete.

Dimplex VFE 20 Specifications

General

Brand	Dimplex
Model	VFE 20
Category	Heater
Language	English